Car Alarms: bicron vcs 7000, purple wire, remote start

Question
I am installing the bicron 7000 remote start/alarm on a 98 accord. It says to hook the purple wire to the door positive and I cannot find a door positive wire. IT also says to connect the purple/black wire to ignition 3 which is 10 a (-) output during operation and the purple/white wire to the relay and has 100 ma (-) during start. I have no clue where these wires go. Any Idea?

Answer
Most all alarms, Bicron too I expect,
will provide wiring for all variables and
car/truck makes and models. Some simply do not apply
to your vehicle here.

Not going to be using the violet. It's for + door trigger vehicle.
That's most always a Ford. Disregard.

same with the 3rd ignition wire.

I strongly suggest you get the install notes for your
vehilce at my site www.WIREWERX.com and then you
will have you project laid out for you.

Good luck.
ALARMTEK
ALARMTEKONLINE.com