QuestionI'm a frustrated DIY guy with the above combo. I can not get the alarm to "hold" a program setting. Go through the program procedure, then try to exit and get a horn+siren chirp and the change doesn't hold. Trying to set arm/disarm to silent. Had one case where I programed it, tried it and it worked until the program sequence timed out, got the horn/siren and no longer had the change I wanted. Also sometimes getting auto alarm but didn't try to set it this way. Ready to toss this one and get a more reliable unit.
Thanks in advance.
AnswerSorry about this, but legally prescribed.
Due to a mutual agreement with Directed
Electronics, I don't provide information
here for service or, support on any DEI
vehicle alarms or, remote start systems
since they have a dealer network designed
for that. That's how they want it.
Your's is one such device of DEI's.
However, for questions about DEI equipment
& support, I've set up an area where
you can get some help.
Please go to my forum at www.INSTALLSUPPORT.com
& ask Robert, the forum moderator, who is
there to assist you.
Just restate this inquiry there.
He's very good about getting back
to folks quickly.
That's
INSTALLSUPPORT.COM
Good luck.
ALARMTEK
