QuestionI recently unplugged a 20AMP fuse (not in the panel) from under my dash to see if it was blown ( I was looking for my trailer light fuse) When I plugged it back in the alarm went off. To turn if off I have to turn the key forward then hit what I beleive to be the valet button under the dash. Then alarm is off and I can start the car.
But, now the alarm goes off every time I get in the car and have to go through this process every time.
Usually when I lock the car with my remote the horn sounds (alarm on?) then when I unlock it with the remote it chirps (alarm off).
Now it still sounds the horn when I lock it but when I unlock it I only hear the doors unlock, no chirp. I enter and the alarm goes off again.
Feels like I am stealing my car every time I have to go somewhere. HELP!
All of this merely because I removed a fuse and plugged it right back in?
AnswerHello.
I am away from my desk for the next couple of days.
Please restate this inquiry at my 12 volt
installers Forum at www.INSTALLSUPPORT.com .
I am certain that this will be solved
for you there within a couple of hours.
Good luck.
ALARMTEK
