Car Alarms: car ignition kill switch, 2008 toyota matrix, transmitter button

Question

fob Hello, I bought a used 2008 Toyota Matrix with a security system on it - basically you have to push on a small transmitter button attached to my key chain and this allows your engine to start when turning the keys.  It works fine.  The problem is that I've lost a set of keys with the security button/fob and now I have just one set left.  If I lose it my car will not start.  I took the car to 3 alarm shops but none can figure out how to remove the system and we don't know what brand it is - the fob switch has no markings.  I've attached some pics with this email.  The technicians explained that the system looks like a factory install as there are no signs of it, i.e., no tape no cuts no spliced wires etc.  they can't see it or find the relay wires / module.  I called the Toyota dealer where the car was purchased and they said that they contract out their alarm systems.  I called that store - which is many hours away - and they were not helpful and couldn't assist without me bring the car in or even guess on the brand / type of alarm.  Any ideas on how to remove this beast?  Thanks.

Answer
I suggest talking to one of the
techs in my Forum about this one.

Please go to www.INSTALLSUPPORT.com
re state this inquiry there.
I am certain my guys will be
happy to assist if possible.

I hope you find the answer/solution
to your issue.

Regards,

ALARMTEK/CARPROTECTOR.COM