Car Alarms: k-9 mundial, car alarm installer, dash area

Question
I have this alarm on a Mitsubishi and at times, it does not disarm- When I try to open manually the alarm sounds- I do not know where the inside switch is or how to resolve this problem- Any ideas??
Thanks
John

Answer
Look under the dash area for the spring loaded button.
Then try key on, press and hold in the button until
you get a chirp. That should be valet over ride.

Then repeat the steps to go back into user mode.
If the alarm continues to "sound" off, then take to
a local car alarm installer for evaluation.

Good luck with it.

ALARMTEK
CARALARMMAN.COM