Car Alarms: panic button, auto accessory store, volt switch

Question
help installing a panic button inside the car.  need the alarm to go off from a push of a button.

Answer
Does your alarm have a remote sir?
If so, it should also panic the system
if needed. press and hold in each button
until yours goes into panic mode.

If looking to add a button
to the dash area, a 12 volt switch can
be set up to send a 12 volt signal to the
trigger wire on the siren. Go to any
Auto accessory store, or even some
Radio Shack's to get a button you like.
From there it's ground one side, and
tap the other to the (+) wire of the siren.
This then controls it from your button.

Have a good day.

ALARMTEK