QuestionQUESTION: My alarm some times starts with no problem but most of the time as soon as the current hits the starter wire it cuts the starting feature off.I hav tried to check and found when i disconnect the starter wire from the alarm side of the ignition starter wire,the remote start works, the feature doesnt cut out,but tries to re-start, but can because the starter wire not connected and the unit doesnt get a signal from the tacho wire to show car is started.
ANSWER: What car? (make, model & year?)
Sounds like a conflict in the remote starters
sensing program.
A.
---------- FOLLOW-UP ----------
QUESTION: Honda civic, VTI 1994,
AnswerOk, re do the wiring to make a correction on the tach wire
and tach learning mode.
Since all remote starters
are different, you would need to consult
your manual for instructions to do that,
but the car wiring info is at the
Honda Civic Archives at www.hondasecurity.com
Good luck with the repair/ trouble shooting.
ALARMTEK
caralarmman.com