Car Alarms: pro-start 2300 trigger wire found,02 Jeep grand Cherokee Panic button?, jeep grand cherokee, pin conn

Question
When I ground the pro-start 2300 trigger wire it starts fine. Now how do I get a negitive pluse from my OEM 2002 Jeep Grand Cherokee key fob Panic button to operate this remote starter?
I tested the wires comming form the remote key module in the passenger door panel with no luck.
Question is, Is there anyway I can find a negitive or even positive pulse from the remote key module?


Answer
That's because there is no negative trigger.
The door locks would have been the way,
but they are 5 wire reverse in the front doors,

I don't have an answer that will send negative
for this vehicle. I do appologize, but
nothing in my notes here would be able
to be used here to trigger the remote start
like you intend. You can't really use
the car's horn wire, GRAY/ORANGE (-)  
52 PIN CONN POS 1 BEHIND LEFT SIDE OF DASH
as it would over trigger it.

Try www.installsupport.com .
The guys in my forum may have something else....

ALARMTEK