QuestionQUESTION: Ok. There's a little black box with a red and green light on it and they light up when I touch the box. There also is a little red nob on it that I can turn with a little screwdriver or something. Is this where I find the valet switch?
ANSWER: Nope, that's the shock sensor.
Please go to www.scytek.net
and have a look at the manual.
It will show the picture of the valet
switch/button. Should be self evident,
and under the dash drilled into the plastic
panel to the left leg area.
Can't make it any plainer then that.
Sorry.
A.
---------- FOLLOW-UP ----------
QUESTION: Ya i know and i already printed the manual but I really don't see the box below the dash. Either it's not visible at all or its not there I really don't know.
But another question is that the manual says the sensors can be temporarily bypassed by arming the system and then within 5 seconds press the arm button again but when I do this it just disarms the system since the arm and disarm button are the same button. How do I bypass the sensors so the alarm wont go off during storms?
AnswerSorry you felt my advise was not up to snuff.
I did try to help, provided solid information
and links to solve the problems, but I guess
it was not enough to avoid a bad rating.
I will try harder to assist the next person
who asks for this information
Sorry you were disapointed.
I wish you well any way,
& good luck with it.
ALARMTEK
Volunteer, Allexperts.com
