Car Alarms: 94 intrepid alarm wont stop, side kick panel, oem radio

Question
I wrote earlier about alarm going off and i have no key fob. Advice was to try turning key. OK Is there a way to permanently disarm the alarm, maybe a code for the OEM radio or a way to just switch it off. Thank you.

Answer
In the 1994 Dodge Intrepid,
The FACTORY ALARM DISARM WIRE IS lt.green/orange,
Located in the drivers door harness or in the
drivers or passenger side kick panel area.

Once Located, splice into this wire with
a simular guage wire, and put it to
a solid chassis ground. This terminates
the alarm functions entirely.

However, at this point,
I suggest you get an after market
alarm system to protect it from here
on out.

Have a good day.

ALARMTEK
CARALARMSTORE.com