Questionthe vip rs3000 alarm system from toyota was all plug-in to vehicle wiring...no cutting or splicing
-------------------------------------------
The text above is a follow-up to ...
-----Question-----
I RECENTLY PURCHASED AND INSTALLED A VIP RS3000 ALARM SYSTEM FROM TOYOTA. MY PROBLEM IS THE PASSENGER SIDE DOOR IS NOT RECOGNIZED BY THE SYSTEM. FOR EXAMPLE, IF THE UNIT IS ARMED AND I OPEN IT FROM THE OUTSIDE OR INSIDE THE ALARM WILL NOT SOUND, THE DOME LIGHT WILL COME ON. DO YOU KNOW WHAT COULD BE THE PROBLEM. THANKS
-----Answer-----
Sounds like you are not on the propper door trigger
wire. It should be black/white |-|at the top/rear
of fuse box. Please re check this connection,
then try to trigger it again.
ALARMTEK
DELUXESERVICE.com
AnswerThen there is a problem with the interface to your
truck. If it's a molex connector, the passenger side
door trigger is not reading. May have a malfuntioning
brain box there.
If possible, have the dealership give you another
brain box to confirm it.
Have a good night.
ALARMTEK