Car Alarms: Black Widow Remote Trunk Release, power trunk, auxillary

Question
G'day and Thanks, I'm sure that will help.  I'm stuck though trying to figure out which alarm wire will trigger the solenoid, they're all black and unmarked (for security I guess) Are you familiar with this particular product?  Thanks again.
-------------------------------------------
The text above is a follow-up to ...

-----Question-----
I have a black widow BW10000 (Australian) with a 2 button remote.  I want to wire up the trunk solenoid so I can open it with the second button, I bought the car second hand without the alarm wiring diagram.  Any help with how the trunk solenoid needs to be connected would be appreciated.  Thanks
-----Answer-----
Really depends on the car or truck.
if the vehicle came with a power trunk already,
then you need to determine the polarity of
it's trigger. You may need to invert the
power through a relay. Locate the button
inside the vehicle and use the wire
behind the switch.

Please go to www.relayhelp.com
and have a look at the 2 ways to
wire in the relay for this application.

Let me know how it goes.
GDAY!

ALARMTEK
CARALARMSTORE.com

Answer
Wish I could help, but unfortunately, that one
would neep onsite inspection to determine which wire does what.

But you are looking for the auxillary 1 or 2 output.

If it were the US versions, they would be shown at
www.BLACKWIDOWSECURITY.com

Good luck, & cheers!

ALARMTEK