Car Alarms: factory security 94 jeep grand cherokee, jeep grand cherokee, wire splice

Question
Description: security is on the fritz    some times wont start  battery dead so i jump and the lights are blinking horn honking have to use key in door to stop that also driver display blinking w/buzzer going nonstop how can i fix or remove?

Answer
The PURPLE/YELLOW factory disarm wire
is in the harness to the drivers
door, inside the drivers kick, in a
black plug. Locate this wire splice
into it with the same guage wire,
then ground it to a solid chassis point.

This takes out the factory alarm for however
long you keep this wire grounded.

It is the only way I know of to get around
the factory alarm system in this truck.

If it's an aftermarket system,
then that's another story.

Let me know what happens.

A.