Car Alarms: marksman alarm system override, dash area, flip switch

Question
Hi
Both of my  automatic alarm system  key things stoped working. Now i can't shut the alarm from ,making noise. The instruction my alarm packet are not doing what the suppose to. Please tell me step by step how can i stop the alarm for now.
thank you
shivani

Answer
Ok, try this.
   Put the key in the ignition, and turn forward
all the way just before cranking. Then within
5 seconds, press and hold in the valet/overide
button, found under the dash area in most cases,
until the installed LED (the blinking light)
in your dash area comes on solid.
(Your valet switch might be the toggle (on/off) type.
in this case, key on, flip switch in oposite direction,
key off.)

This should be valet. This overides
the starter kill relay in the alarm harness,
and returns the car back to disarmed mode.

The only thing that will work now on your system,
is the keyless entry if installed.

Just Repeat these steps to rearm your system.

That should do it.

Let me know what happens.

ALARMTEK
AUTOPAGER.com