QuestionI currently have an Ipod that i would like to use with my 1998 s10 blazer. I will be removing my in- dash stereo and replacing it with another once I have the money to do so. As for now, i want to hook up my i-pod to my in-dash stereo using the auxillary input, which i believe is behind the in-dash stereo. This is where i have a problem.
There are no screws that i can find that will remove the grey plastic covering the stereo, so i don't know how to take that off. Also, now that I think about it, how will i be able to connect my ipod without having the stereo player completely exposed? Any suggestions would be helpful.Thanks
Here's a pic of what my stereo looks like exactly. go down to the second picture.
http://www.picsearch.com/info.cgi?q=blazer%20stereo&id=V5CoSjuk5NoK4UDpmcnD1pGCm...
Answerhi
the plastic around the radio comes out it is hold by clips only sometimes there is two screw by cluster but not all vehicles
half of the dash over the cluster and head lights switch
to remove it start there at the head light switch i will send you the link i don't want to type all the instructions you can look at pics and get the idea
VERY IMPORTANT MOST OF THE PEOPLE THAT TRY THIS THE FIRST TIME
THEY DAMAGE THE HAZZARD SWITCH BE CAREFULL AND MOVE THE STERING DOWN HERE IS THE LINK
http://www.installdr.com/InstallDocs/GM/PDF/460001.pdf
ALSO the aux button on the radio is not that simple to make work it needs software or and electronic interface sending the signal to the radio for the radio to open the aux port you need this interface cable another link
good luck
http://www.oemautosound.com/c-83-chevrolet-auxiliary-input-converters.aspx
