Questionam going to install a radio in my car.
am having problems with the wires i know the speakers wires.my question is red and yellow goes to power 12volts right?
I have 2 wires left i dont have a black one.
i have a blue white strip and a gray black stripwhere do they go..
the model radio is deh-p4500mp
Answer
If you think that yellow and red go to the same location, I semi-doubt that you know speaker wires much better (esp since you have one of the speaker wires left over), but since you asked about that Pioneer, here we go:
Yellow (memory)
To terminal always supplied with 12v power regardless of ignition switch position.
Red (Power)
To electric terminal controlled by ignition switch (12 V DC)
ON/OFF.
Black (ground)
To vehicle (metal) body.
Blue/white (Remote turn-on lead or 'Kicker lead')
To system control terminal of the power amp or Auto-antenna relay control terminal (max. 300 mA 12 V DC).
Gray and Gray/Black
Front Right speaker positive and NEGATIVE leads.
White and White/Black
Front Left speaker positive and NEGATIVE leads.
Violet and Violet/Black
Rear Right speaker positive and NEGATIVE leads.
Green and Green/Black
Rear Left speaker positive and NEGATIVE leads.
mmmk?
