Audio Systems: infinity radio failed display, infinity radio, jeep cherokee

Question
Display has failed on my 1995 jeep cherokee  infinity radio. The radio plays fine but there is no display.

I have seen information on either a cold solder joint on a resistor and/or a failed resistor that causes the diplay failure.

I need to know which resistors to reflow the solder and/or replace.Also the Resistor ID [Rxxx] and location on the printed circuit board.

Thankyou

Answer
Hello Tony,
Most of the time I find defective solder connections on the vacuum display tube connections on the display board. To give you any info on this radio I will need the complete model number/s off the radio.

TOM,
T&D ELECTRONICS
[email protected]