QuestionQUESTION: i have just bought an 88 cadillac eldrado and the clusters dont work. i checked the fuses and the look good what should i do?? i also tried new bcm and new clusters and that did not do the trick? also my service cluster light comes on?
ANSWER: Using the climate control panel, retrieve the codes from the computer and let me know what they are.
---------- FOLLOW-UP ----------
QUESTION: the climate control dose not work either can i still retrive the code???
ANSWER: Try unplugging the climate control panel wires at the back side and see if the displays come back. If they don't plug it back in.
Try unplugging the fuel data display and see if the displays come back. If they don't plug it back in
If NOT You will need Test procedures and picture locations of the components within the system that is causing you problems of which can't be done on this website which only allows one picture. I do not have a website so you will have to e-mail:
[email protected] in order to obtain the information.
---------- FOLLOW-UP ----------
QUESTION: i did try that and it didnt work could it be the bcm?? cause i tested the harness and its gettin the proper 12 that it needs.
AnswerThe displays run on 3 different voltages, 5 volts, 12 volts and 16 volts.
You will need, If necessary, Electrical schematics, Test procedures and picture locations of the components within the system that is causing you problems of which can't be done on this website which only allows one picture. I do not have a website so you will have to e-mail:
[email protected] in order to obtain the information.
