QuestionHad bad gage cluster replaced with good used one but wont start due to theft system Dealer says to reprogram cluster leave key on for 11 min turn off for 3 secs 5 times and it will reprogram Doesnt work! put old cluster back in it fires right up!
Answer1. Turn ignition key to run position.
2. leave in RUN position a minumum of 10 minutes, turn key to OFF position.
3. turn key to RUN position.
4. leave in RUN position a minumum of 10 minutes, turn key to OFF position.
5. turn key to RUN position.
6. leave in RUN position a minumum of 10 minutes, turn key to OFF position.
7. verify repair.