Chrysler Repair: 2007 Sebring headlamp replacement, lamp unit, negative cable

Question
I want to replace the headlights in my 2007 Sebring. I can't get the headlight assembly out, it is hung up in the center on the bottom of the assembly. Am I missing something? I removed the front grill and the two screws holding the assembly in.

Answer
LAMP UNIT
Labor Operations: Click to display a list of Labor Operations associated with this procedure


1. Disconnect and isolate the battery negative cable.
2. Loosen the fascia on the side that you are working on (Refer to 13 - Frame and Bumpers/Bumpers/FASCIA, Front - Removal) .




3. Remove the lower headlamp assembly fasteners (2) and the lower facia support bracket (1).




4. Remove the lower outboard fastener (6).




5. Remove the upper fastener closest to the center of the vehicle (3).




6. Remove the upper fastener closest to the fender (4).




7. Disconnect the front lamp unit electrical connectors (5) and remove the front headlamp assembly.


NOTE: If replacing the front lamp unit, the bulbs must be transferred to the new unit.