Chrysler Repair: 2004 PT Cruiser, camshaft position sensor, ground tone

Question
P0344-Camshaft Position Sensor A Circuit Intermittent Bank 1\r\n
Spitting and sputtering

We've fixed the Camshaft Position Sensor twice, replaced the timing belt and put new plugs and wires on it.  What else can possibly be the problem???

Answer
POSSIBLE CAUSES
GOOD TRIP EQUAL TO ZERO
WIRING HARNESS INSPECTION
(K7) 5 VOLT SUPPLY CIRCUIT OPEN OR SHORTED TO GROUND
TONE WHEEL/PULSE RING INSPECTION
CHECKING CKP SIGNAL WITH THE DRBIIIt LAB
CAMSHAFT POSITION SENSOR
(K44) CMP SIGNAL CIRCUIT OPEN
(K44) CMP SIGNAL CIRCUIT SHORT TO GROUND
(K44) CMP SIGNAL CIRCUIT SHORTED TO B+
(K44) CMP SIGNAL CIRCUIT SHORT TO (K7) 5 VOLTS
PCM