QuestionQUESTION: i have a 97 t &c that will start for a min then dies i have changed the tps cause that is what the code said and it did work could you help me
ANSWER: any other thing happening when u try and start it? what other codes where there and what was the tps code?
---------- FOLLOW-UP ----------
QUESTION: the tps code is p0122 and not it starts for a second then dies shortly after that
AnswerP-0122 THROTTLE POSITION SENSOR VOLTAGE LOW
POSSIBLE CAUSES
TPS 5-VOLT SUPPLY CIRCUIT OPEN
TPS SIGNAL CIRCUIT SHORT TO GROUND
TPS SIGNAL CIRCUIT SHORT TO SENSOR GROUND CIRCUIT
TPS WIRING HARNESS INTERMITTENT DEFECT
TPS WIRING HARNESS OBSERVABLE DEFECT
PCM DEFECTIVE (TPS)
THROTTLE POSITION SENSOR DEFECTIVE
THROTTLE POSITION SENSOR VOLTAGE CHANGE NOT SMOOTH
TRANSMISSION CONTROL MODULE DEFECTIVE (TPS
