Chrysler Repair: brake light bulb replacement, hex head bolts, lamp unit

Question
how I get access to brake lights to replace burned out bulb. 2006 Pacifica

Answer
REMOVAL
1. Disconnect and isolate the battery negative cable.

2. Open liftgate, remove two hex head bolts in inner D-pillar Fig. 1 .


Fig. 1 - TAIL LAMP UNIT - REMOVE/INSTALL  
1 - REAR LIFTGATE OPENING  2 - REAR TAIL LAMP UNIT  


3. Rotate lamp outboard away from vehicle to remove tail lamp forward stud from grommet.
4. Disconnect electrical connector.
5. If replacing the tail lamp unit, transfer lamps to new unit.