Chrysler Repair: Brake caliper screws, socket head cap screws, torx head screws

Question
I am about to replace the front brake pads on my 2002 Chrysler Sebring convertible.
I am told that the front calipers are retained by socket head cap screws. If so could you please advise if they are hex or TORX  head screws and what size they are?
Thank you

Answer
Hi Robert,
I am virtually certain that the caliper pins are hex head, but as to the size I can only guess them to be 13 mm +/- 1 mm. The torque spec is 26 foot-pounds.
Roland
PS Please 'rate' my answer, and where you see the question about 'volunteer of the month' please consider answering 'yes' if you believe I warrant that. Thank you.