QuestionQUESTION: The engine runs very rough. I replaced the plugs, wires with no change. I took it to a mechanic and he got several codes: PO304, P1695, P1391, PO352, SBEC. He indicated the coil pack was my problem so I have changed that. There is no change in the way the car runs can you give me a clue where to look next. (I bought a cam shaft sensor but have not put it on yet).
Thanks!
ANSWER: what engine size is this?
---------- FOLLOW-UP ----------
QUESTION: Sorry, I should have given you that info. It is a 4 cylinder (2.4 liter)I have since tested the old coil pack and think it was ok (I had continuity from the ground to each of the other posts. I still have not put the cam shaft sensor on pending a response from you.
AnswerP-1695 NO CCD MESSAGE FROM BODY CONTROLLER
P-0304 CYLINDER #4 MIS-FIRE
P-0352 IGNITION COIL #2 PRIMARY CIRCUIT
POSSIBLE CAUSES
AUTO SHUTDOWN OUTPUT CIRCUIT OPEN
IGNITION COIL #2 CONNECTOR TERMINAL OBSERVABLE DEF
IGNITION COIL #2 DRIVER CIRCUIT OPEN
IGNITION COIL #2 DRIVER CIRCUIT SHORTED TO GROUND
IGNITION COIL CIRCUIT WIRING HARNESS INTER DEFECT
IGNITION COIL CIRCUIT WIRING HARNESS OBS DEFECT
IGNITION COIL #2 DEFECTIVE
PCM DEFECTIVE (IGN COIL #2)
