Chrysler Repair: crank position sensor, bolt head, foot pounds

Question
Hi Roland, thank you for all your help so far. He has found the sensor but
cannot see the bolt head to see what size it is. Can you help??

                       Thanks
                        Larry

Answer
Hi Larry,
It would be a mm size, probably 10 or 11 mm. Tell him to leave the paper spacer on the tip of the sensor, push it in until the tip touches the surface of the hidden drive plate that it 'senses' and hold that contact while tightening the bolt to about 9 foot pounds of torque (not that much, but tight so it doesn't move from that position).
Roland