Question i own a 2005 chrysler 300 base model rwd 2.7 6cyl. just purchased new front hub assemblies for both sides and cant tell if its a bolt on install or they need to be pressed on. not sure if i should do it my self. can u give me some basic directions?
AnswerRWD
1. Raise and support vehicle. (Refer to 04 - Vehicle Quick Reference/Hoisting - Standard Procedure)
2. Remove wheel mounting nuts (3), then tire and wheel assembly (1).
3. Access and remove front brake rotor. (Refer to 05 - Brakes/Hydraulic/Mechanical/ROTOR, Brake - Removal)
4. Remove dust cap (2). When doing this, avoid damaging internal bore of hub to preserve seal integrity.
5. Remove hub nut (1).
6. Slide hub and bearing off knuckle spindle
