Chrysler Repair: Cirrus 2000 V6, cylinder head bolts, chrysler cirrus 2000

Question
I need the torq specs for the conecting rods and the heads
for chrysler cirrus 2000 V6 2.5 engine

Answer
Install rod caps. Install nuts on cleaned and oiled rod bolts and tighten nuts to 52 N·m (38 ft. lbs.)

Tighten cylinder head bolts using the following procedure:
Tighten cylinder head bolts in sequence Cylinder Head Bolt Tightening Sequence to 108 N·m (80 ft. lbs.)
Loosen all bolts fully.
Retighten cylinder head bolts in sequence Cylinder Head Bolt Tightening Sequence to 108 N·m (80 ft. lbs.)