Chrysler Repair: Chrysler Neon Fog light always on, front fog lights, chrysler neon

Question
QUESTION: Hi Kevin,

I have a Chrysler Neon in the UK and the front fog lights are stuck on. The switch appears to faulty, if I lightly press down on the end of the stalk the lights go off but if I let go, they are back on again - this quickly drains the battery.
Is it easy to remove the indicator stalk and repair/replace the switch? If so can you advise on the procedure.

Thanks,

Andy


ANSWER: what year neon?

---------- FOLLOW-UP ----------

QUESTION: Hi, 2001.

Regards,

Andy

Answer
REMOVAL
Disconnect and isolate the battery negative cable (DISCONNECT AND ISOLATE BATTERY NEGATIVE CABLE).
Remove both upper and lower steering column shrouds. (Refer to 19 - STEERING/COLUMN/UPPER SHROUD - REMOVAL).
Disconnect both posi-lock harness connectors at the rear of the multi-function switch (MULTI-FUNCTION SWITCH REMOVE/INSTALL)
Remove multi-function switch mounting screws (MULTI-FUNCTION SWITCH REMOVE/INSTALL).
The combination flasher must be transferred to new multi-function switch if replacing.
The windshield wiper/washer switch must be transferred to the new multi-function switch. (Refer to 8 - ELECTRICAL/WIPERS/WASHERS/WIPER/WASHER SWITCH - REMOVAL).