QuestionQUESTION: I have a 2004 Chrysler Pacifica my defroster is not working
the panel and floor vents are working fine I checked the blend door actuator it is moving I just don not know if it is moving into the right position. Would you have any
suggestions. Thanks for Your Help... Harry
ANSWER: I dont think u can get to the actuator for the defrost look on the driver side and see if u can get to the one all the up at the top that is for the defrost check the motor for power and ground.
---------- FOLLOW-UP ----------
QUESTION: Thanks for your reply. I am a bit confused I thought that the actuator for the defroster was on the passenger side under the glove box. Are there two actuator for the system ?
Thanks again for Your Help.... Harry
AnswerU have 3 or 4 total 1 for mode which is where the air goes 1 for the reticulation door inside and outside air and depends if u have dual controls one for each driver and passenger side temp. the mode door one is on the top of the other ones driver side.