Chrysler Repair: replace windshield washer pump motor, windshield washer pump, hand twist

Question
How to get access to windshield washer pump motor on 2004 sebring sedan

Answer
REMOVAL
Disconnect and isolate the battery negative remote cable.
Partially remove the bumper fascia as needed to gain access to the reservoir pump. Refer to Frame & Bumpers, Bumpers, Front Fascia, Removal.
Place a drain bucket below the reservoir to catch any washer solvent that may leak out.
Firmly grasping pump by hand twist and pull away from reservoir and out of grommet. Care must be taken not to puncture reservoir.
Remover rubber grommet from reservoir and throw away