Chrysler Repair: where is the thermostat, coolant temp, inlet hose

Question
I have a 2000 , 2.5 ltr, sebring that needs a new thermostat, but i don't know where its located. Is it at the base of the filler neck like most thermostats? I have never worked on a front wheel drive so I'm not sure.

Answer
its there  right be the coolant temp sensor

THERMOSTAT - 2.5L ENGINE
REMOVAL
Drain cooling system to the thermostat level or below.
Remove inlet hose and coolant inlet elbow from thermostat housing Thermostat, Housing and Inlet Elbow - 2.5L Engine
Remove thermostat assembly, and clean sealing surfaces.
INSTALLATION
Install thermostat into the recess in the thermostat housing.
Install inlet elbow and tighten the bolts to 19 N·m (168 in. lbs.) Thermostat, Housing and Inlet Elbow - 2.5L Engine
Fill cooling system. Refer to Cooling System Refilling in this section