Classic/Antique Car Repair: 61 Chevy C10 truck, hydraulic brake system w/ clutch, chevy c10, hydraulic brake system

Question
question regarding '61 Chevy C10 truck, hydraulic brake system w/ clutch:

I replaced the brakes, wheel cylinder (both left & right), and rubber hose on the front of my '61 Chevy C10 truck.  I've bled the brakes and can not get any pressure.  I cleaned the master cylinder and got pressure back in the clutch, but can not get the pressure in the  brakes.  I can not find any leaks and now after bleeding there is not much fluid coming out of the rear left.

***The reason I replaced the front brakes is 'cause the front left side was leaking fluid.

Answer
Mike;
Look for any leaks, than if all is god keep the master cyld. full at all times first bleed the l/r  brakes  than check the fluid fill if needeed than do the r/r brake than fill the mast. cyld. than do the r/f  than fill mast. cyld than l/f  than fill mast cyld and  bleed the mast cyld. too. it might take a few times  you opened the system so all of the air got to come out, it will work, take your time. if you have a tank bleer thats even better.