Dodge Repair: 2005 Durango Crankshaft Sensor, camshaft position sensor, crankshaft sensor

Question
where is the crankshaft sensor located on a 2005 Dodge Durango 5.7L?

Answer
crank
5.7L V-8




Raise vehicle.
Disconnect CKP electrical connector (2) at sensor.
Remove CKP mounting bolt (3).
Carefully twist sensor from cylinder block.
Remove sensor from vehicle.
Check condition of sensor O-ring.

cam
5.7L




The Camshaft Position Sensor (CMP) (3) is located on right side of timing gear/chain cover below generator (1).

Disconnect electrical connector (3) at CMP sensor.




Remove sensor mounting bolt (3).
Carefully twist sensor (2) from timing gear/chain cover.
Check condition of sensor O-ring