Dodge Repair: 2005 Dodge Durango Ignition Cyl Switch Lock will Not Turn, 2005 dodge durango, dodge durango

Question
QUESTION: 2005 Dodge Durango (No alarm or special code in key)
I am unable to turn the key to start.
I have sprayed anti-seize lubricant & tapped lightly
Any remedies?
If Ign Cylinder Swith Lock needs to be replaced.
How do you replace it ?

ANSWER: does the key work in the door?

---------- FOLLOW-UP ----------

QUESTION: The problem is specific to the Ignition Cylinder Lock/Switch not entry in the door (which both regular key & spare new key hardly every used-works in door) but doesn't turn the switch.

Question:  How do your replace the Ign Cylinder Lock on 2005 Durango.

Thanks

Answer
it would be the key cly  not switch  and U will haft to replace the tumblers or swap over the old ones to the new key cly.
Remove the cover and then a little button will need to be pressed when the key is in the run pos and it will pull out key and cly together.