Dodge Repair: CRANK SHAFT SENSOR, crankshaft position sensor, crank shaft

Question
WHERE IS T THE CRANK SHAFT TIMING SENSOR LOCATED ON A 98 DODGE SPORT WITH A 360. i HAVE  POWER TO THE COIL BUT NOT FROM IT. i WAS TOLD TO CHECK THE CRANK SHAFT TIMING SENSOR

Answer
CRANKSHAFT POSITION SENSOR - 3.9L/5.2L/5.9L ENGINES
REMOVAL
The sensor is bolted to the top of the cylinder block near the rear of right cylinder head Crankshaft Position Sensor

.
Remove the air cleaner intake tube.
Disconnect crankshaft position sensor pigtail harness from main wiring harness.
Remove two sensor (recessed hex head) mounting bolts Crankshaft Position Sensor
Remove sensor from engine.
INSTALLATION
Position crankshaft position sensor to engine.
Install mounting bolts and tighten to 8 N·m (70 in. lbs.) torque.
Connect main harness electrical connector to sensor.
Install air cleaner tube.