QuestionLeft rear window dropped...told the regulator/motor needed replaced. Dealership wants $360+ to do it. Know how to remove door panel...how hard is it to replace the regulator/motor?? Found an OEM part for $149+ shipping. Much better than $360. Thank you.
AnswerRoll window down.
Remove window crank (WINDOW CRANK - TYPICAL), if equipped.
Remove screws attaching trim panel to door (REAR DOOR TRIM PANEL).
CAUTION: Do not forcibly pull trim panel from door, damage to trim panel may occur.
Simultaneously lift upward and outward to release retainer steps from inner door panel (TRIM PANEL RETAINER).
Disengage inside handle linkage rod from inside handle.
Disconnect power widow/lock harness connector, if equipped (POWER WINDOW/LOCK CONNECTOR).
Separate door trim panel from vehicle.
If necessary, pull upper trim extension outward to disengage from rear door