Dodge Repair: Durango AC/Heater Fan, blower motor resistor, hex screws

Question
QUESTION: Hopefully this is a quick fix. I have an '01 Durango SLT. The problem is the fan only works on high. The fan remains off in all positions Except "high". Heat works fine, AC blows cold but the "High or Off" thing is pretty annoying. Checked fuses under hood and the left of Dash; both are OK. Any suggestions? Thanks.

ANSWER: blower motor resistor   behind the top part of the dash

---------- FOLLOW-UP ----------

QUESTION: Thanks for the quick response. My friend has the same problem with her Stratus. I'm sure she'll be happy to get it fixed.

Answer
the stratus is easy to get to under the pass side  2 screws.
yours  is as fallowed.
REMOVAL
Disconnect and isolate the battery negative cable.
From the passenger foot well area, remove the two hex screws used to secure the blower motor resistor.
Unplug the front blower motor resistor from the wire harness connector.
Remove the front blower motor resistor from the HVAC unit.