Dodge Repair: replace front bearing on 99 durango, spindle nut, dodge durango

Question
I need to replace the driver's side front bearing on my 99 dodge durango. I have never done it before and looking for any advise. Torque spec for any bolts, or pointers in completing the job.

Answer
HUB/BEARING
REMOVAL
Raise and support vehicle.
Remove wheel and tire assembly.
Remove brake caliper, rotor, and ABS wheel speed sensor if equipped, Refer torakes.
Remove hub/bearing spindle nut Hub/Bearing
Slide hub/bearing off spindle
INSTALLATION
Slide hub/bearing on spindle.
Install hub/bearing spindle nut and tighten to 251 N·m (185 ft. lbs.)
Install brake rotor, caliper, and ABS wheel speed sensor if equipped, Refer torakes.
Install wheel and tire assembly.
Remove support and lower vehicle.