Dodge Repair: crank sensor, crank sensor, mounting bolt

Question
where is it located 97 ram 5.2 automatic

Answer
REMOVAL
The crankshaft position (CKP) sensor is mounted to the transmission bellhousing at the left/rear side of the engine block.

The sensor may be mounted to the transmission with one of the following three different configurations:

with one bolt (Crankshaft Position Sensor—One-Bolt Mounting). If sensor is equipped with one mounting bolt, it is adjustable..
with two nuts (Crankshaft Position Sensor—Two-Nut Mounting).
with two bolts (Crankshaft Position Sensor—Two-Bolt Mounting).
Near left-rear side of engine, disconnect sensor pigtail harness (electrical connector) from main electrical harness connector. These connectors are attached to a bracket which is attached to the left-front side of the transmission.
Depending upon application, remove either sensor mounting bolt(s) or nuts.
Remove sensor from engine.