Ford Repair: replace studs on rear, cheater bar, ford 350
QuestionSeveral stubs are stripped on the rear of my ford 350 econo. How do I go about replacing them?
AnswerMike, there are a couple of different ways to do it. However, I would tell you the best way. Take a C-clamp and press the stud out of the hub. It will be tight, so you may have to use a "cheater bar." To put the new one in, just dip the stud in some soapy water. Then push the stud into the hole. Find a nut that matches the thread, and tighten down until the stud bottoms out. (the thread size will probably be 1/2 in. by 20) If you have any other problems or questions, feel free to ask. Good luck, Jason