Jeep Repair: ignition switch pin out, jeep wrangler, driver 3

Question
I have a 97 jeep wrangler 4.0L and I suspect that the ignition switch is faulty.  I have removed the unit and was wondering how to test it.  I have a repair manual but it does not have the layout of which pin/prong corresponds to what on the unit itself.  For example looking at the switch I don't know what pin/prong is 1-1 or B-1.  Can you help with this??

Thank you,
Andy

Answer
IGNITION SWITCH CAV CIRCUIT FUNCTION
1 Z1 16BK GROUND
2 G9 20GY/BK RED BRAKE WARNING LAMP DRIVER
3 A2 12PK/BK FUSED B(+)
4 A22 12BK/OR IGNITION SWITCH OUTPUT (RUN)
5 - -
6 - -
7 A1 14RD FUSED B(+)
8 A31 14BK/WT IGNITION SWITCH OUTPUT (ACC/RUN)
9 A21 14DB IGNITION SWITCH OUTPUT (RUN/START)
10 A41 14YL IGNITION SWITCH OUTPUT (START)