QuestionQUESTION: I just replaced the compressor and added new r134. The included pressure gauge is showing the correct pressure (35 psi) however, the clutch is not engaging. What did I do wrong? Funny thing is that it didn't seem to take long to fill up with freon. HELP!
ANSWER: what kinda car is this did u attach back the electrical connector?
---------- FOLLOW-UP ----------
QUESTION: It's a 2002 Jeep Liberty 3.7 Limited. I had recently asked you a question before I replaced the compressor asking you if replacing the drier was necessary. You replied, "you dont have to replace the drier" The black electric connector is connected.
ANSWER: how much freon did u put in? u will need 1.5 lbs and did the fuse blow for the clutch?
---------- FOLLOW-UP ----------
QUESTION: I didn't even use 1/2 can of the stuff. How many cans is 1.5 lbs?
Answerthat's your prob right there 1 can is 1 lb put the whole can in ignore the pressure readings for now. Turn jeep off attach new can and start the jeep up turn on ac it will then suck the rest in there and U will be good to go U need 1.69 lbs of freon in the system but the rest of the .3 wont do any damage if it all goes in.
