QuestionQUESTION: I have a 2000 grand cherokee larado and the horn stopped working. The fuse was blown so I replaced it, and the relay under the hood but all I hear is the relay clicking, but no horn?
ANSWER: check to see if there is power right at the horn when u press on the horn pad.
---------- FOLLOW-UP ----------
QUESTION: I was alone so I checked using the key fob and pressed the lock button (horn sounds when doors lock), but I was getting power to both harnesses to each of the horns.
ANSWER: ok so U have a horn switch or possible the clock spring in the wheel bad if the horn works from the key fobs.
---------- FOLLOW-UP ----------
QUESTION: although I was receiving power to the harnesses the horns still didn't work, but still how do I check and or find the horn switch or clock spring is this an easy process to do I need to take it in to the dealer?
Answerthe horn switches are in the wheel and the clock spring is behind it I doubt u have the special wheel puller inorder to get the wheel off to replace the clock spring or U will snap the wheel in half. SO a dealer should check it out for u and get u the right answer.
