Land Rover Repair: ignition coil, heater hoses, throttle body

Question
how involved is pulling intake besides removing 4 bolts on top of intake and thank you for your help
-------------------------------------------
The text above is a follow-up to ...

-----Question-----
how do we replace ignition coil on a 2001 discovery it is between engine and firewall and do we need to pull intake if so how do we
-----Answer-----
You have to remove the intake to access the coils.  It's a 3-4 hour job.  I suggest fitting ne wplugs and wires at the same time because it's so much work to get at them.

Answer
There is quite a bit around it - the throttle body; the throttel body heater hoses; alternator may be in the way; etc.

Look closely and you'll see why I told you it took that long.

There is no special trick to it but there's a lot to remove and refit.