QuestionQUESTION: I got the bike as a basket case,butchered wiring,missing stator cover/shifter hardware,ect.
I have gone through great lengths to get the bike where it is now.
After somewhere in the $400-$500 spent on parts,this old critter shredded one of it's two clutch friction plates.
It is a 80cc Fuji engine with a 4speed full manual tranny.
I drained the oil and pulled the clutch basket,got it open.
Heres where things get difficult,the clutch has 6springs,two steel plates,and two friction plates.
I cannot find the style of either sets of plates for that specific clutch,and it only requires the friction plates be changed.
Any ideas?Am I going to have to change & update the whole basket?
Or do you know where I can find an exact replacement?
ANSWER: This is a long shot but try Steves Cycle Salvage in Tifton Ga. 1(800) 622-9253 It is about 7 acres of new and used parts and they are linked to 100 other yards and send parts al over the united states.
---------- FOLLOW-UP ----------
QUESTION: Is there possibly anything closer to home (NYS southern tier)
I only know of one.....Big Pond
AnswerI dont know of any that direction but you might try (bikez.com) they have over 19000 bikes for show as to what some of them looked like there may be a link off to a salvage yard close to you,Im just not sure. There has to be a lot of salvage yards out there,this may turn into a internet search party,sorry!
