Motorcycle Repair: no spark to plugs, plug wires, electronic ignition

Question
have dyno elc. ign. and have no spark to plugs.have 5.4 ohms across coil and have power to coil.is there a way to test the dyno ign. is there a pos and neg side to the coil.its a 78 sporester.

Answer
5.4 OHMs is to much for an electronic ignition. So first I would replace the coil. While you are replacing the coil i would replace the plug wires too.
When you replace the ignition that doesnt mean the ignition is going to work. You might also have a bad ignition
Good luck and happy riding
Mike