QuestionI just returned from a 150 mile ride, I am hearing a rubbing noise from the front tire.
After I put the bike on the lift, I spun the front tire by hand, it makes 1 revolution & stops.
I put a flashlight behind the front disk & see no light between rotor & pad(normal?) any help as to problem? wheel bearings?(no grinding) or front brake problems? or other? Thanks for any/all help
TIA Coop
Peace Out
AnswerPull the front tire and check the wheel bearings just to make sure they are ok.
You will not see much clearence between rotor and pads. they do rub a little. If they are to tight then you need to remove the caliber and check the puck in it to make sure its not sticking
Good luck and happy riding
Mike