Motorcycle Repair: bike stalls on itself, kawasaki ninja zx6r, water in the fuel

Question
  I was riding my 1996 kawasaki ninja zx6r in the highway and when i am about to exit i press the clutch and let it roll so it can slow down. When I hold it the clutch the rpm drop to about 800rpm but then it just drop to 0rpm and the bike just stalls.  It happen a few times, One time I stop on a red light holding the clutch in first gear, then the bike suddenly stalls.  Can you help me figure out what is the problem please. Many thanks.

-Ken  

Answer
Hi Ken.
 With no other symptoms to go on, I would say that you have either a short/bad connection/bad fuse in the ignition system or water in the fuel.

 If the bike starts up after a few tries, then it could be water in the fuel.

 If the bike starts back up right away, then it could be a bad fuse connection or intermittent short.

There is also the possibility of the ignition coils going bad, but that is the last thing you should check for.

You will need a multimeter and the repair manual to check the wiring as well as the coils.

Let me know what you find.
Good luck.
FALCON