Nissan Repair: clutch hitting floor, clutch system, slave cylinder

Question
i just replaced my clutch i drove it for about 500 miles then my clutch started hitting the floor i replaced the slave and master cylinder but nothing i checked the hose that connects to the slave cylinder its was bad so i had a new one put on there but nothing i need help???????????????

Answer
Joel,

If the clutch is bled properly then you are looking at the release fork.  It might have come off the pivot or it could be broke or bent.  Pull back the rubber boot and see what the condition is.  If it is good then you need to bleed the clutch system again.